Japanease site   global site

Tokai Bussan Co.,Ltd. Manufacture of insertnut TOKAI MMC

Tokai Bussan Co.,Ltd.
Manufacture of insertnut TOKAI MMC

Tokai Bussan Co.,Ltd.
Manufacture of insertnut TOKAI MMC

Mini Bit Insert (MIB)

ビットインサート

●Features

“Mini bit” is the general type of TOKAI insert, which is mini size of bit insert.
“Mini bit” is excellent for “lightweight of products” & “miniaturization.”
・Knurling outer diameter---∅2.8
・Knurling---For bit insert
・Thread size---No more than M2

●Material

Brass

●Applied Resin

Thermoplastic

●Usage

Machine & Tools
  1. Use hammer and punch
  2. Use drilling machine
  3. Use soldering gun
    Deposition machine with temperature control & various punches
Insertion
method
Press Fit Thermocompression
Press Fit
Thermocompression
①Set Insert nut→②Press fit or Thermocompression→③Press fit or Thermocompression

Parent material size

A: Twice or more length of insert nut, as thick as possible
B: 2.5~2.6mm
C: 3.3mm or more

Note at using

Make decision to use after testing because various things are considered about the hole shape of the parental material.

Dimensions Table

MIB

MIB
Thread D1 D2 L Part No.
M1.4×0.3 2.5 2.8 3.0 MIB-142530Z
M1.6×0.35 2.5 2.8 3.0 MIB-162530Z
M1.7×0.35 2.5 2.8 3.0 MIB-172530Z